Resumo Objetivo Devido ao aumento do número de idosos que vivem em instituições de longa permanência são essenciais projetos de ações para melhorar a saúde bucal. Assim, o objetivo deste estudo foi avaliar o impacto de um programa educacional para os cuidadores de idosos institucionalizados por meio da avaliação da higiene bucal. Material e método O programa de educação consistiu em palestras para cuidadores sobre saúde bucal que foram realizadas uma vez por mês. Foram avaliados 40 idosos institucionalizados dependentes funcionalmente e 14 cuidadores. Os hábitos de higiene, o índice de placa e o revestimento/descoloração da língua dos idosos foram avaliados antes do programa educacional (T0) e após 6 (T1), 12 (T2), 18 (T3) e 24 meses (T4). Os cuidadores responderam perguntas sobre seus conhecimentos, suas dúvidas e sobre a implementação de cuidados bucais (T0 a T4). Resultado Após análise dos dados (Friedman, Qui-quadrado e Spearman, α = 0,05), observou-se melhora gradual na higiene oral dos idosos, com maior freqüência de escovação (p = 0,0005), alteração do tipo de escova (p = 0,0065) e redução do índice de placa (p <0,05) e revestimento da língua (p <0,05). Os cuidadores mostraram uma melhoria acentuada no seu conhecimento sobre saúde bucal. Conclusão Concluiu-se que o programa educacional para cuidadores teve um impacto positivo na saúde bucal dos idosos institucionalizados observado pelo aumento na eficácia dos parâmetros de higiene bucal, como índice de placa e revestimento da língua, contribuindo para o ganho de conhecimento em higiene pelos cuidadores.

Abstract Objective Due increased number of elders living in long-term care institutions, actions designs to improve their oral health are essential. Thus, the aim of this study was to evaluate the impact of an educational program for the caregivers through the assessment of the oral hygiene of institutionalized elders. Material and method The education program consisted in lectures to caregivers about oral health that were performed once a month. The subjects were 40 functionally dependent institutionalized elders and 14 caregivers. Hygiene habits, plaque index, and tongue coating/discoloration of the elders were measured before the educational program (baseline- T0) and after 6 (T1), 12 (T2), 18 (T3) and 24 months (T4). Caregivers answered questions about their knowledge, doubts and implementation of dental care (T0 to T4). Result After analyzing the data (Friedman, Chi-square and Spearman α = 0.05), a gradual improvement in the oral hygiene of the subjects was observed, with an increased frequency of brushing (p=0.0005), a change in the brush type (p=0.0065) and a reduction in the plaque index (p<0.05) and tongue coating (p<0.05). Caregivers showed a marked improvement in their dental care knowledge. Conclusion It was concluded that the educational program for caregivers had a positive impact in the oral health of institutionalized elderly observed by the increased in the effectiveness of oral hygiene parameters such as plaque index and tongue coating, contributing to the knowledge gain in hygiene by caregivers.

Resumo Este estudo avaliou o efeito de protocolos de desgaste e ressinterização no limite de fadiga flexural e na caracterização da superfície da zircônia LavaTM. Corpos-de-prova em forma de barra (20×4,0×1,2 mm, n=40; 20×4,0×1,5 mm, n=80) foram obtidos. Metade das barras com menor altura (1,2 mm) constituiu o grupo controle (AS), enquanto as de maior altura (1,5 mm) foram desgastadas com fresas diamantadas com (WG) ou sem (G) irrigação. A outra metade dos corpos-de-prova de menor altura e metade dos desgastados foram ressinterizadas (1000 °C, 30 min), obtendo-se os grupos ASR, WGR e GR. O limite de fadiga (500.000 ciclos, 10 Hz) foi avaliado pelo método de escada em dispositivo de flexão em 4 pontos. Os dados foram analisados pelos testes ANOVA a dois fatores e Tukey (α=0,05). A topografia de superfície (n=3) e área de fratura (n=3) foram avaliadas por MEV. Os dados de difração de raios-X (n=1) foram analisados pelo refinamento de Rietveld. ANOVA revelou diferenças significantes (p<0,001) para desgaste, ressinterização e interação entre os fatores. O desgaste aumentou o limite de fadiga para os grupos não ressinterizados. Não houve diferença significante entre os grupos ressinterizados. A ressinterização aumentou o limite de fadiga somente para o grupo AS. Ambos os protocolos criaram riscos evidentes na superfície da zircônia. As falhas iniciaram sempre no lado de tração. A porcentagem de fase monoclínica foi: AS (8.6), ASR (1.2), G (1.8), GR (0.0), WG (8.2), WGR (0.0) antes e AS (7.4), ASR (6.5), G (3.2), GR (0.2), WG (4.6), WGR (1.1) após a ciclagem. O desgaste aumentou o limite de fadiga da zircônia não ressinterizada e formou ranhuras evidentes na sua superfície. A ressinterização promoveu aumento significativo no limite de fadiga somente para o grupo controle. Em geral, o desgaste e a ressinterização diminuíram ou anularam o conteúdo de fase monoclínica.

Abstract This study evaluated the effect of grinding protocols and resintering on flexural fatigue limit and surface characterization of LavaTM Y-TZP. Bar-shaped specimens (20×4.0×1.2 mm, n=40; 20×4.0×1.5 mm, n=80) were obtained. Half of the thinner specimens (1.2 mm) constituted the as-sintered group (AS), while the thicker ones (1.5 mm) were ground with diamond burs under irrigation (WG) or not (G). The other half of thinner and half of ground specimens were resintered (1000 ºC, 30 min), forming the groups ASR, WGR and GR. Fatigue limit (500,000 cycles, 10 Hz) was evaluated by staircase method in a 4-point flexural fixture. Data were analyzed by 2-way ANOVA and Tukey's test (α=0.05). Surface topography (n=3) and fracture area (n=3) were evaluated by SEM. X-ray diffraction data (n=1) was analyzed by Rietveld refinement. ANOVA revealed significant differences (p<0.001) for the grinding protocol, resintering and their interaction. Grinding increased the fatigue limit of non-resintered groups. There was no significant difference among the resintered groups. Resintering significantly increased the fatigue limit of the AS group only. Both protocols created evident grooves on zirconia surface. The failures initiated at the tensile side of all specimens. The percentages (wt%) of monoclinic phase were AS (8.6), ASR (1.2), G (1.8), GR (0.0), WG (8.2), WGR (0.0) before, and AS (7.4), ASR (6.5), G (3.2), GR (0.2), WG (4.6), WGR (1.1) after cyclic loading. Grinding increased the fatigue limit of non-resintered Y-TZP and formed evident grooves on its surface. Resintering provided significant increase in the fatigue limit of as-sintered specimens. In general, grinding and resintering decreased or zeroed the monoclinic phase.

A paralisia cerebral é uma anormalidade causada por lesões no sistema nervoso central que podem ocorrer durante o período pré, peri ou pós-natal. É caracterizada por alterações múltiplas como o comprometimento da fala, da coordenação motora e corporal, do equilíbrio, do intelecto e da mastigação e deglutição. Devido aos movimentos anormais da musculatura facial, juntamente com o comprometimento da função de autolimpeza, o paciente pode apresentar quadros de patologia bucal como a cárie, a doença periodontal e a perda dental. O objetivo deste trabalho foi relatar o caso clínico de um paciente portador de paralisia cerebral com ausência dos incisivos centrais superiores, portador de prótese removível e com um quadro de candidose bucal. Foi realizada a moldagem dos arcos superior e inferior e as radiografias periapicais. Pôde-se observar que os incisivos laterais apresentavam reabsorção radicular, o que contra indicava a sua utilização como pilares para prótese fixa. Devido às condições sócio-econômicas e limitações relacionadas a paralisia cerebral, foi confeccionada uma prótese adesiva e, para a candidose bucal foi instituído o tratamento com solução de Nistatina. O resultado do tratamento foi estética e funcionalmente adequado para o paciente.

Cerebral palsy is a disorder caused by central nervous system injuries that can occur during the prenatal, perinatal, or postnatal periods. It is characterized by multiple abnormalities, including impairment of speech, body and motor coordination, balance, intelligence, mastication, and swallowing. Due to abnormal movements of the facial muscles, compounded by impairment of the self-cleansing mechanism of the oral cavity, patients with this condition can develop oral diseases such as caries, periodontal disease, and tooth loss. The aim of this paper is to report a case of a patient with cerebral palsy who presented with absence of the maxillary central incisors, removable prosthesis wear, and oral candidiasis. Impressions of the upper and lower arches and periapical radiographs were obtained. The lateral incisors were found to exhibit root resorption, which contraindicated their use as abutment teeth for fixed prosthodontics. In view of the patient's socioeconomic status and cerebral palsy-related limitations, a resin-bonded fixed partial denture was fabricated and nystatin solution was used for treatment of oral candidiasis. The patient had an esthetically and functionally adequate outcome.

Favorable results in the use of castor oil polyurethane (COP) as pulp capping, membrane material, sealer, mouthwash and in bone repair, associated with the fact that Ricinus communis is not derived from petroleum and it is abundant in Brazil, encourage researches in the development of luting agents. Objectives This study compared the flexural strength (FS) of a castor oil-containing dental luting agent with a weight percentage of 10% (wt%) of calcium carbonate (COP10) with RelyX ARC (RX) after mechanical cycling (MC) and distilled water storage. Material and Methods Sixty-four specimens (25x2x2 mm) were fabricated and divided into two groups, COP10 and RX (control). Each group was divided into 4 subgroups (n=8) according to the storage time, 24 hours (24 h) or 60 days (60 d), and the performance (MC+FS) or not (only FS) of the mechanical cycling test. The FS (10 kN; 0.5 mm/min) and MC tests (10,000 cycles, 5 Hz, 0.5 mm/min) were carried out using an MTS-810 machine. The data were analyzed using ANOVA (α=0.05). Results The obtained FS (MPa) values were: COP10 24h- 19.04±2.41; COP10 60d- 17.92±3.54; RX 24h- 75.19±3.43; RX 60d- 88.77±6.89. All the RX specimens submitted to MC fractured, while the values for COP10 after MC were as follows: COP10 24h- 17.90±1.87 and COP10 60d- 18.60±1.60. Conclusions A castor oil-containing dental luting agent with a weight percentage of 10% (wt%) of calcium carbonate is resistant to mechanical cycling without decreases in flexural strength. However, mean COP10 showed only about 25% of the RelyX ARC mean flexural strength.

The need to develop new dental luting agents in order to improve the success of treatments has greatly motivated research. OBJECTIVE: The aim of this study was to evaluate the diametral tensile strength (DTS) and film thickness (FT) of an experimental dental luting agent derived from castor oil (COP) with or without addition of different quantities of filler (calcium carbonate - CaCO3). MATERIAL AND METHODS: Eighty specimens were manufactured (DTS N=40; FT N=40) and divided into 4 groups: Pure COP; COP 10%; COP 50% and zinc phosphate (control). The cements were mixed according to the manufacturers' recommendations and submitted to the tests. The DTS test was performed in the MTS 810 testing machine (10 KN, 0.5 mm/min). For FT test, the cements were sandwiched between two glass plates (2 cm²) and a load of 15 kg was applied vertically on the top of the specimen for 10 min. The data were analyzed by means of one-way ANOVA and Tukey's test (α=0.05). RESULTS: The values of DTS (MPa) were: Pure COP- 10.94±1.30; COP 10%- 30.06±0.64; COP 50%- 29.87±0.27; zinc phosphate- 4.88±0.96. The values of FT (µm) were: Pure COP- 31.09±3.16; COP 10%- 17.05±4.83; COP 50%- 13.03±4.83; Zinc Phosphate- 20.00±0.12. One-way ANOVA showed statistically significant differences among the groups (DTS - p=1.01E-40; FT - p=2.4E-10). CONCLUSION: The experimental dental luting agent with 50% of filler showed the best diametral tensile strength and film thickness.

OBJECTIVE: This study compared the cutting capacity of carbide burs sterilized with microwaves and traditional sterilization methods. MATERIAL AND METHODS: Sixty burs were divided into 5 groups according to the sterilization methods: dry heat (G1), autoclave (G2), microwave irradiation (G3), glutaraldehyde (G4) or control - no sterilization (G5). The burs were used to cut glass plates in a cutting machine set for twelve 2.5-min periods and, after each period, they were sterilized (except G5) following the protocol established for each group. The cutting capacity of the burs was determined by a weight-loss method. Data were analyzed statistically by Kruskal-Wallis and Dunn's test. RESULTS: The means of the cutting amount performed by each group after the 12 periods were G1 = 0.2167 ± 0.0627 g; G2 = 0.2077 ± 0.0231 g; G3 = 0.1980 ± 0.0326 g; G4 = 0.1203 ± 0.0459 g; G5 = 0.2642 ± 0.0359 g. There were statistically significant differences among the groups (p<0.05); only dry heat sterilization was similar to the control. CONCLUSION: Sterilization by dry heat was the method that least affected the cutting capacity of the carbide burs and microwave sterilization was not better than traditional sterilization methods.